Skip to main content

Trash Panda Cleans Up Nice: Fuckin’ Easy Sugar Scrub

My sister won the best Christmas gift award last year and gave me a sugar facial scrub. And now I’m almost out. Time to make my own. 

Ingredients

1 cup oil 

2 cups sugar

15 drops essential oil (optional)

Steps

Mix ‘em up, maybe add a bit more sugar or oil depending on if you like how the consistency turns out. So fuckin’ easy. 

How to use

Use half a spoonful or less of the scrub to gently rub into your face til the sugar dissolves, then rinse. Use up to every other day on face and neck, every day on other parts of the body.

Store in a tightly sealed jar to prevent moisture from getting in. I use a tiny spoon to get the scrub out so I don’t get water in it when I use it in the shower. It’s great for all seasons - nicely moisturizing in the winter, a gentle scrub to remove sun screen in the summer.

Recommended Oils

I recommend using a nice light non-cosmogenic oil since you’ll be using this on your face. Jojoba is nice if you’re feeling fancy or grapeseed will work well and you can find it easily at the store. I like suncoco but it might be too heavy for folks with oily skin. If you had some laying around, you could use an oil you’ve infused with some skin friendly herbs like calendula or lavender.

Recommended Sugars

The pros to using sugar as a scrubby base are that it’s inexpensive, easy to get, has smaller & smoother granules than coffee grounds, it doesn’t stain like coffee grounds do, and isn’t drying like salt. It also dissolves faster than salt, so it’s a gentler scrubby experience.  I used normal white refined sugar because I already have some in the cupboard and it has the granularity I like. 

Pure cane (unrefined white), raw and brown sugar is supposed to have more minerals or whatever but I don’t know if it matters for rubbing it briefly on your face. Pure cane sugar has a similar granularity to white refined sugar, and brown sugar is smaller so it would be a gentler scrub. Raw sugar is a larger, rougher granule so I would recommend using it in a hand or foot scrub rather than a face scrub. 



Labels:

Comments

Post a Comment

Popular posts from this blog

Trash Panda Likes It Hot: DIY American-Style Kotatsu

It’s been a fucking difficult year. And now it's the holidays and it's cold out and it's still not safe to spend time inside with loved ones who're outside of your pandemic pod. If you don't have a firepit or one of those expensive outdoor propane heaters how the fuck are you supposed to make this work? Enter the Trash Panda Kotatsu. Ok, so in Japan they've got these cool coffee table looking things with a heavy blanket skirt and a special heating unit attached up underneath. You sit on a cushion, put your legs underneath and snuggle up there to keep warm during the winter. These snuggly table friends are called kotatsu.  Actual kotatsu don't really work for American outdoor winter gathering purposes during COVID because: They're real short. Like just over a foot tall. They're meant for sitting around on the ground or on a cushion. Nobody wants to do that outside during the winter because the ground is cold and wet. Also most Americans are so used
1 comment
Read more

Dumpster Fire, Forest Fire, Easy DIY Air Purifier

It has been a YEAR.  Trash Panda hopes you've been staying sane and safe. Well, as much as you can be in the year of our Everlasting Dumpster Fire 2020 ( Update July 2021: And the year of our Great Anxiety 2021).   Speaking of fires - today's post is about how to make a cheap & effective DIY air purifier. Depending on the rating of the filter you use, it’s good for wildfire smoke, allergens, or even viruses. Parts needed:     + 20"x20" box fan    + Furnace air filter, preferably 20"x20" and with a rating of MERV 13 or higher (more on this later)    + Tape or bungee cord Tape or use a bungee cord to attach the filter on the back/air intake of the box fan and make sure to have the little arrow on the side of the filter facing towards the fan. That's it. Just use enough tape to keep the filter on there, and try not to cover too much of the filter area with tape. You can screw on little metal brackets on the side of the fan to create a more permanent wa
4 comments
Read more